KF5050 2" × 2" TENS, EMS & IFC Electrodes

The Everyway KF5050 electrodes are reusable, self-adhering pads that measure 50 × 50 mm and are compatible with TENS, EMS/NMES, and interferential stimulation devices. Their versatile square shape strikes a practical balance between targeted placement and useful surface coverage, making KF5050 pads suitable for home electrotherapy programs, physical therapy clinics, chiropractic practices, rehabilitation departments, and athletic training rooms.

Each white fabric electrode incorporates Sekisui Japanese conductive gel and a pigtail-style connection designed for standard 2 mm electrode pins. The gel provides the contact layer between the stimulation pad and the skin, while the flexible backing helps the electrode follow ordinary body contours during treatment.

Choose from:

• 4 packages of 4: 16 total electrodes
• 50 packages of 4: 200 total electrodes

The smaller option is convenient for individual users and treatment kits. The bulk configuration helps clinics standardize a common electrode size while maintaining individually packaged sets for separate patients.

• Approximately 2" × 2" square electrode
• Metric size: 50 × 50 mm
• Four electrodes in each individual package
• Available in 16- or 200-electrode quantities
• Reusable, self-adhering conductive gel
• Sekisui Japanese gel formulation
• Flexible white fabric backing
• Pigtail-style electrode connector
• Accepts compatible standard 2 mm lead-wire pins
• Suitable for compatible TENS devices
• Suitable for compatible EMS and NMES devices
• Suitable for compatible interferential stimulators
• Practical general-purpose size for home and professional use
• Manufactured by Everyway Medical Instruments

The KF5050 is a white pigtail electrode range that includes the 50 × 50 mm model, which is designed for use with 2 mm pin-style connections.

A 2" × 2" electrode is one of the most versatile sizes for portable electrotherapy. It provides more contact area than a small targeted pad without taking up as much space as a large rectangle or oversized back electrode.

Balego’s TENS electrode selection guide identifies the 2" square format as a strong general-purpose choice for common home and clinic setups involving compatible TENS, NMES, and FES devices.

The proper electrode size still depends on the treatment location, stimulation parameters, device instructions, and clinician guidance. A larger pad is not automatically better, and a smaller pad can concentrate the stimulation into a smaller skin area.

TENS

TENS, or transcutaneous electrical nerve stimulation, generally uses sensory-level electrical stimulation for temporary pain modulation programs. The KF5050 can serve as a standard replacement pad when the TENS lead wires terminate in compatible 2 mm electrode pins.

Browse our complete selection of TENS units, pads, and lead wires.

Electrical muscle stimulation and neuromuscular electrical stimulation use electrical pulses to activate motor nerves and produce a specific muscle response. The 2" square format provides a useful general-purpose footprint for many muscle-stimulation placements.

Explore our neuromuscular stimulation devices.

It has pigtail electrodes for compatible IF or interferential equipment. Confirm that the interferential unit’s lead wires accept the KF5050’s standard 2 mm pin-style connection before ordering.

KF5050 electrodes do not connect directly to the stimulator. The pigtail socket on each pad accepts the metal pin at the end of a compatible lead wire.

Balego’s 45-inch TENS/NMES replacement lead wires terminate in standard 2 mm electrode pins, but the 2.35 mm device-side plug must also match the stimulator.

• Snap-style electrode cables
• Tab-style electrodes or alligator clips
• Proprietary EMPI safety connectors
• Wireless wearable TENS devices
• Garment electrodes without the proper adapter
• Devices requiring a different pin diameter
• Systems using electrodes permanently attached to their cables

Individually packaged groups of four make it easier to assign one set to a patient and keep unused pads sealed until needed. The quantity options shown above are those currently offered on the Balego product page.

Always follow the instructions supplied with the stimulation device.

1. Turn the stimulator off

The output should be at zero, and the unit should be switched off before connecting, applying, repositioning, or removing the pads.

2. Inspect the electrodes and lead wires

Do not use a pad with damaged gel, torn fabric, exposed conductive material, or a loose pigtail connector. Replace cracked, frayed, or intermittent lead wires.

3. Prepare the skin

Apply the electrodes only to clean, dry, intact skin. Remove lotion, oil, sweat, makeup, or topical creams that could reduce adhesion or interfere with consistent contact.

4. Connect the lead wire

Insert the lead wire’s 2 mm pin fully into the KF5050 pigtail connector. Connecting the wire while the electrode remains on its liner can make handling easier.

5. Remove the pad from its liner

Lift the electrode by its fabric edge. Avoid pulling it by the pigtail wire because such actions can damage the electrode-to-wire junction.

6. Apply it evenly

Place the center of the electrode first and smooth outward toward the edges. The complete gel surface should contact the skin without folded corners or air gaps.

7. Begin at zero intensity

Turn on the stimulator and increase output gradually according to the device instructions and treatment plan. Stimulation should not feel sharp, burning, or concentrated beneath one edge.

8. Turn off before removal

Return the intensity to zero and turn off the device. Peel the electrode slowly from its edge rather than pulling the wire.

9. Return it to the liner

Place each pad gel-side down on its original protective liner and return the set to its resealable package.

These application and removal practices are consistent with the KF5050 distributor instructions and Balego’s general electrode-care guidance.

Reusable electrode life varies according to skin preparation, body oils, humidity, storage conditions, stimulation intensity, and how frequently the pads are handled.

Old, dry, dirty, or poorly attached electrodes can produce weak output, sharp sensations, intermittent stimulation, or edge lift.

Replace the pads when:

• They no longer adhere across the complete surface.
• Edges lift repeatedly during treatment.
• The gel is dry, dirty, damaged, or uneven.
• Stimulation feels sharper than it did with a fresh pad.
• Output becomes weak or inconsistent.
• The pigtail connection feels loose.
• The backing is torn.
• Skin irritation develops.
• The pads were used by another person.

Do not apply ordinary electrode gel beneath a self-adhering KF5050 pad unless the manufacturer specifically instructs you to do so. Added gel can interfere with the adhesive layer.

• You want the Everyway 50 × 50 mm electrode, which is supplied with many compatible stimulation systems.
• You prefer Japanese conductive gel.
• You need either 16 electrodes or a large 200-electrode supply.
• A standard white-fabric 2" square pad fits your treatment workflow.
• Your lead wires terminate in 2 mm pins.

The Everyway KF5050 2" × 2" electrodes are available in quantities suitable for both individual users and high-volume facilities. Balego also offers:

• Free shipping across the United States
• A Best Price Guarantee
• A broad electrotherapy electrode collection
• Compatible TENS units and accessories
• Standard 2 mm pin replacement lead wires
• Educational guidance on choosing TENS electrode size and style
• Product and compatibility assistance through the Balego contact page