Chattanooga Montane Treatment Table Accessories | Paper Roll Holders, Traction Supports & Stabilization Belt

Complete your Chattanooga Montane treatment-table setup with genuine Chattanooga/Enovis accessories, including four different paper-roll-holder configurations, upholstered manual traction supports, and the 371208 stabilization belt.

Montane accessories should be selected by table configuration and manufacturer part number, not by appearance alone. Chattanooga uses different paper-roll holders for fixed-height tables, standard powered Montane tables, tables equipped with Postural Flex, and universal base-frame mounting.

For compatible table configurations, compare our Chattanooga Montane Andes 7 Section Standard Treatment Table and Chattanooga Montane Andes XL 7 Section Wide Treatment Table with Postural Flex.

Choose the Correct Chattanooga Montane Accessory

371007 Fixed-Height Paper Roll Holder

The Chattanooga 371007 is the fixed-height version of the Montane paper-roll-holder system. The manufacturer associates it with fixed height and selected Colombia/Tatras Gerlach configurations rather than the standard powered Andes table.

Like the other Montane paper holders, it is designed for examination-table paper up to approximately 23.6 inches / 60 cm wide.

If you are purchasing for a powered Andes, Alps, or Atlas table, compare 371008, 371009, or 371010 before ordering rather than assuming 371007 will fit.

371008 Standard Montane Hi-Lo Paper Roll Holder

The 371008 Paper Roll Holder is Chattanooga's standard option for compatible electrically height-adjustable Montane tables without postural flex.

Current U.S. data identifies 371008 specifically as the Montane Hi-Lo paper-roll rack without postural drainage and provides U.S. GTIN-14 00888912333542.

This is the logical paper-holder choice for our standard Montane Andes configuration when manufacturer documentation calls for the standard high-low mounting arrangement.

371009 Montane Paper Roll Holder for Postural Flex

The 371009 is the important addition to this page.

Chattanooga specifies this holder for Montane Andes, Alps, and Atlas tables equipped with postural flex/postural drainage. Its mounting geometry differs from the standard 371008 so that it accommodates the table's articulating configuration.

For our customers purchasing the powered Postural Flex version of the Andes XL, 371009 should be presented as the application-specific paper holder, while 371010 provides the universal base-frame alternative.

The holder accepts treatment-table paper up to approximately 23.6 inches / 60 cm wide.

371010 Universal Montane Paper Roll Holder

The Chattanooga 371010 provides the broadest Montane compatibility of the four paper holders.

Rather than using the model-specific end-of-table bracket arrangement, 371010 mounts to the lower base frame. Chattanooga identifies it as the universal holder for Montane tables, including compatible Andes, Alps, Atlas, Tatras, Tatras Gerlach, and Colombia configurations, with or without Postural Flex.

Because it is mounted at the base frame, 371010 is especially useful when a universal retrofit solution is preferred or when manufacturer documentation calls for the universal mounting configuration.

It accommodates paper rolls up to 60 cm / 23.6 inches wide.

371008 vs. 371009 vs. 371010

Chattanooga Manual Traction Supports

The 371102, 371106, and 371107 manual traction supports are upholstered positioning accessories supplied in blue, gray, and graphite gray.

These supports attach to compatible table hardware to provide padded positioning support. They are not complete cervical or lumbar traction belt systems.

For belts, cervical interfaces, patient switches, and dedicated traction-system accessories, see our Chattanooga Traction Accessories.

371208 Chattanooga Stabilization Belt

The 371208 Stabilization Belt is a black positioning belt designed to attach to the side brackets supplied on compatible Chattanooga treatment tables.

Chattanooga lists the belt at approximately 25.8 × 2 inches, including the clasp. It is intended as a table stabilization/positioning accessory and should not be confused with Chattanooga's larger QuikWrap traction belt systems.

The current U.S. GTIN-14 for 371208 is 00888912333665.

Product Identification

Frequently Asked Questions

Which paper roll holder fits a standard Chattanooga Montane Andes table? For a standard powered Montane table without postural flex, Chattanooga identifies 371008 as the standard holder.

Which paper holder fits the Andes XL with Postural Flex? Chattanooga specifies 371009 for Montane tables equipped with postural flex/postural drainage. The 371010 universal holder is also compatible when the base-frame universal installation is appropriate.

What is the difference between 371009 and 371010? 371009 is specifically designed for postural flex-equipped Montane tables. 371010 is the universal version and mounts to the lower base frame, giving it broader Montane compatibility.

How wide a paper roll will these holders accept? Chattanooga specifies paper up to approximately 23.6 inches / 60 cm wide.

What is the difference between 371102, 371106, and 371107? They are upholstery-color versions of the same manual traction/positioning support: blue, gray, and graphite gray, respectively.

Is 371208 a complete traction belt? No. 371208 is a treatment-table stabilization belt. For mechanical traction belts and cervical systems, use the dedicated Chattanooga traction-accessory products.

Does Balego include shipping? Yes. Balego offers free U.S. shipping, so the displayed accessory price represents a much more useful delivered price than competitors that add parcel shipping at checkout.