Clearly Adjustable® Heel Lift | 1mm–12mm Clear Orthopedic Shoe Lift

The Clearly Adjustable® Heel Lift is a firm, transparent shoe lift that lets you change heel elevation in 1mm increments from 1mm to 12mm.

Unlike a soft heel cushion, it is designed to provide a measurable amount of elevation without relying on compressible foam or gel. Peel away a layer to reduce the lift by 1mm; replace a layer when more elevation is needed. The clear vinyl can also be trimmed to fit individual shoes.

Sold individually. One quantity equals one heel lift, not a pair.

Choose by the width of the shoe's heel pocket first—not solely by your normal shoe size.

Heel-pocket dimensions can vary considerably between athletic shoes, boots, dress shoes, and sandals even when the printed shoe size is the same.

These shoe-size ranges are approximate. Recommends measuring across the inside heel area of the specific shoe and trimming the lift when necessary.

Choose Small for narrow heel pockets, smaller shoes, or dress footwear where the rear of the shoe provides limited width.

Choose medium for many average adult shoes. It is the middle 60 mm width option and corresponds to the medium size currently sold on Amazon.

Choose Large for wider heel pockets, larger footwear, many boots, or sandals where a wider support platform may improve stability. Clearly Adjustable specifically lists "Large" as the common sandal option.

The lift arrives at its maximum configuration. Each removable vinyl layer changes functional elevation by 1mm.

The useful measurement point is where the heel bone rests rather than the curved extreme rear edge of the lift.

That distinction is important when you are trying to reproduce a professionally specified lift height.

One-eighth inch equals approximately 3.2 mm. The Clearly Adjustable lift, therefore, provides much smaller height changes than a traditional 1/8-inch peel-away design.

The Balego Adjustable Heel Lift is the simpler choice when 1/8-inch increments are sufficient.

Choose Clearly Adjustable when the ability to fine-tune elevation by individual millimeters is worth the additional cost.

A heel lift and a heel wedge solve different mechanical fitting problems.

If the goal is specifically inward or outward heel angulation rather than elevation, compare our heel wedges.

Clearly Adjustable can also be modified for side-to-side wedging, but the manufacturer recommends that this type of customization be performed with appropriate professional guidance.

For most closed shoes, place the lift under the existing insole or footbed, with the smooth surface facing the insole. Your foot then continues to contact the shoe's original cushioning surface.

1. Lift or remove the rear portion of the insole.
2. Place the heel lift into the heel pocket.
3. Replace the original insole over the lift.
4. Confirm that the heel remains securely contained by the shoe.

Carefully lifting the rear of the footbed if it can be done without damaging the shoe. If you cannot safely lift the insole, consider a shoe-repair professional instead.

Usually, no tape is needed in a conventional low-heeled closed shoe.

The underside has a stair-stepped surface designed to grip the shoe's heel pocket. The manufacturer notes that adhesive may become useful with higher-heeled footwear or when a lift tends to creep forward.

Avoid improvised adhesives that may damage or soften the vinyl.

Yes. One of this product's unusual advantages is the transparent vinyl, which is substantially less visible than a typical black, white, cork, or foam insert in open footwear.

For sandals, a wider lift is often needed because an open shoe does not provide the same heel-pocket sidewalls as a closed shoe.

The lift may need to be secured in open footwear.

Choose Clearly Adjustable when you need a lift. Choose a cushion when the primary goal is softness or impact cushioning.

A heel lift is sometimes used as part of professional management of a measured leg-length discrepancy. In that situation, the lift is generally placed beneath the insole on the shorter side at the height selected by the evaluating professional.

Do not estimate a significant leg-length discrepancy solely from symptoms, hip position, or how one leg appears while standing.

Professional evaluation before using a heel lift for a medical or gait-related correction.

That depends on why the lift is being used.

The product itself is sold individually so one or two lifts can be ordered according to the fitting plan.

The correct prescribed height still has to fit safely inside the footwear.

Higher lift settings occupy more vertical space inside the shoe. If the heel begins slipping out of the shoe or feels unstable, that shoe may not safely accommodate the selected amount of elevation.

Yes.

Clearly adjustable vinyl can be trimmed with scissors or, when appropriate, a cutting blade to fit an unusually narrow heel pocket.

Trim for shoe fit, not to guess at a medical correction.

The manufacturer recommends washing the lift with water and mild detergent. Individual layers can be separated for cleaning and restacked after drying. Washing also helps restore the self-adhering quality between the vinyl layers when dust, moisture, or foot powder has reduced adhesion.

Choose Clearly Adjustable when millimeter-level height control, firm noncompressible construction, clear appearance, and shoe-specific trimming matter more than simply purchasing the lowest-cost adjustable lift.