WeTrac CT-800 Cervical Traction Device | Home Neck Traction Unit

The WeTrac CT-800 Cervical Traction Device is a portable, prescription device for home neck traction designed to apply controlled pulling force while the user lies comfortably on their back.

Unlike over-the-door systems that depend on suspended weights and a chin-and-head harness, the WeTrac uses an integrated cable-driven traction mechanism. Turning the handheld control knob gradually advances the head carriage while an easy-to-view scale displays the applied force. A red release button allows the user to reduce traction promptly when the prescribed treatment is complete or the stretch needs to be lowered.

Adjustable neck wedges touch the occipital region at the back of the head, helping direct traction through the upper cervical area while reducing reliance on the chin and jaw. Four angle settings—10°, 13°, 15°, and 18°—allow the line of pull to be configured according to the clinician’s treatment plan. The device arrives assembled and includes a carrying bag for storage and transport.

Notice: The WeTrac should be used only after an appropriate cervical-spine evaluation and with the exact force, angle, duration, and treatment frequency supplied by a qualified healthcare professional. Traction should never cause pain.

• Supine cervical traction for clinician-directed home programs
• Direct cable-driven traction instead of an air pump
• Hand-operated knob for gradual force adjustment
• Visible pound-force scale
• Red quick-release button
• Four traction-angle positions
• Adjustable, removable neck wedges
• Force directed toward the occipital region
• Adjustable forehead stabilization strap
• No electrical power or batteries
• No assembly required
• Portable carrying bag included
• One-year manufacturer warranty

The WeTrac is a model CT-800 and describes its force direction as being toward the occiput, or back of the head, to help decrease strain through the jaw and neck.

The four angle positions and operating controls are documented in the CT-800 manual. The current iStim listing confirms the carrying bag and cable-driven knob design.

Cervical traction applies a controlled pulling force to the neck. In a rehabilitation program, it may be used to temporarily change mechanical loading around the cervical joints, muscles, and nerve-root regions to alleviate symptoms enough to tolerate movement or to support progression into exercise.

Traction should not be presented as permanently “realigning” the spine, putting a disc back in place, curing arthritis, or guaranteeing that a pinched nerve will resolve. Clinical guidance generally treats traction as one possible part of a broader program that can also include mobility exercises, strengthening, posture and ergonomic education, and graded return to normal activity.

A randomized clinical trial involving people with neck pain and signs of cervical radiculopathy found that adding mechanical traction to exercise improved some longer-term pain and disability outcomes compared with exercise alone or exercise plus over-door traction. That evidence supports careful patient selection and combined care—not unsupervised traction for every type of neck pain.

Explore related equipment and education in Balego’s cervical and lumbar traction collection.

Direct cable traction

The WeTrac uses a mechanical cable to move the head carriage rather than a pneumatic cylinder or suspended weight bag.

The user turns the control knob clockwise to increase traction. As cable tension increases, the carriage moves gradually, and the neck wedges apply the prescribed pull through the back of the head.

The manual instructs users to turn the knob slowly, monitor the force scale, and stop when the clinician-prescribed level is reached.

The neck wedges are positioned below the ears and above the shoulders so that they contact the sides of the neck near the occipital region. As the carriage advances, the traction force is directed toward the back of the head.

This design differs from many over-door systems, which use a fabric halter around the chin and occiput. The WeTrac still uses a forehead strap for stabilization, but it does not depend primarily on pulling through the chin.

The rear-angle stand has four slots:

The angle controls the direction of pull; it is not a severity or power setting. A higher angle is not automatically more effective. The appropriate position depends on the diagnosis, symptom behavior, treatment objective, and clinician’s assessment.

The following are conditions for which a clinician may consider cervical traction:

The presence of one of these conditions does not establish that traction is appropriate. The prescribing professional should determine whether symptoms respond favorably to traction and specify the force, angle, timing, and treatment schedule.

The complete unit incorporates the following:

• WeTrac traction-device body
• Movable head carriage
• Head pad
• Two adjustable neck wedges
• Adjustable forehead strap
• Handheld traction knob and force scale
• Red release control
• Four-position rear angle stand
• Connecting traction cable
• User instructions
• Carrying/travel bag

These instructions explain the device’s operating sequence. They do not determine the appropriate clinical settings.

1. Review the prescribed parameters

Before using the device, confirm all of the following with the prescribing professional:

• Traction force
• Treatment duration
• Static or intermittent schedule
• Hold and rest times, when applicable
• Number of sessions per day or week
• Angle of pull
• Symptoms that require treatment to stop

The manual specifically directs patients to obtain these instructions before beginning treatment.

2. Remove items around the head and neck

Remove earrings, necklaces, scarves, ties, hats, bulky collars, and other items that could interfere with the head carriage.

Long hair should be moved away from the track, cable, head pad, and gap around the moving carriage. Hair, fingers, and hands must remain clear of all moving spaces.

3. Select a safe treatment surface

Place the WeTrac on a firm, flat, nonslip surface. A carpeted floor is recommended in the manual. When using a firm floor, place a suitable nonslip mat beneath the device.

Do not use it on a soft mattress, unstable bed, couch cushion, sloped surface, or any location where the base can move during treatment. Please ensure that the cable is free and not trapped beneath the unit.

4. Return the carriage to the starting position

Before lying down:

1. Press and hold the red release button.
2. Turn the traction knob counterclockwise.
3. Continue until the head carriage reaches the bottom starting point.
4. Release the red button.

Do not increase force while the carriage is still returning to its start position.

5. Set the prescribed angle

Turn the device over and squeeze the two adjusters that release the rear stand. Move the stand into the 10°, 13°, 15°, or 18° slot specified by the clinician.

Confirm that the stand is completely seated before placing the device back on the floor.

6. Pre-adjust the neck wedges

Squeeze the wedge-adjustment tabs and move the wedges inward or outward for the user’s neck width.

The final position can be refined after lying down. Both wedges should be seated securely on their posts with their contoured surfaces facing inward.

7. Lie on the device

Lie on your back with your head resting flat on the head pad. The wedges should contact the neck below the earlobes and above the shoulders, near the back-of-head region.

Reposition your body rather than forcing the neck into the wedges.

8. Secure the forehead strap

Place the strap across the forehead and adjust the hook-and-loop ends until it is snug enough to stabilize the head without causing uncomfortable pressure.

9. Apply traction gradually

Turn the knob clockwise slowly while watching the force scale. Stop as soon as the exact prescribed force is reached.

Do not select a force based on body size, pain level, online recommendations, or the device’s maximum capacity.

10. Monitor symptoms throughout treatment

A controlled stretching sensation may occur, but traction should not cause pain. Stop immediately for:

• Increasing neck pain
• New or worsening arm pain
• Numbness or tingling
• Weakness
• Dizziness
• Nausea
• Visual disturbance
• Headache that is new or worsening
• Any unusual or distressing symptom

The manual directs the user to discontinue treatment and consult the prescribing professional before using the device again when pain, dizziness, nausea, or other abnormal discomfort occurs.

At the end of the prescribed time:

1. Press the red release button.
2. Allow the initial force to decrease.
3. Continue holding the release button.
4. Turn the knob slowly counterclockwise.
5. Return the carriage to the starting position.
6. Release the button.
7. Loosen the forehead strap.
8. Remain lying down and relaxed for a minute or two.
9. Sit up slowly only after you feel steady.

Do not turn the traction knob to increase force while the red release control is being used or while the carriage is traveling back to the starting position.

The Saunders device uses a pneumatic pump with an intuitive-to-read gauge and a valve intended to help limit excessive pressure. Its three angles begin at 15°, while the WeTrac offers four positions beginning at 10°. Both apply direct force through the occipital region and are intended for professionally directed home treatment.

For detailed Saunders setup information, read our Saunders Cervical Traction Guide: Indications, Angles, Setup, and Safety.

Choose the WeTrac when:

• A direct mechanical cable system is preferred.
• Four lower-angle positions are useful.
• A turning knob feels easier to control than repeated hand pumping.
• A visible force scale and quick-release button are priorities.
• A soft travel bag is preferred.

• A pneumatic hand pump is preferred.
• A built-in blow-off valve is important.
• The treatment plan calls for 20° or 25° traction.
• A rigid carrying case is preferred.
• The clinician is already familiar with the Saunders pump-and-gauge system.

Neither device should be selected solely according to price. The clinician should consider the required line of pull, the force-control method, the fit, the diagnosis, and the user’s ability to operate the release system safely.

The Occipivot is compact and may be used for gentle support at the base of the skull, but it does not create or measure cervical traction force. It should not be marketed as a lower-cost equivalent to the WeTrac.

Clinics developing complete cervical and lumbar workflows can also review the Chattanooga Triton DTS Traction Accessory Packages.

The WeTrac manual states that cervical traction should not be used for:

These are not the only possible reasons to avoid traction. Recent surgery, unexplained neurological symptoms, severe bone disease, vascular concerns, or other significant medical conditions require direct professional evaluation before treatment.

• Recent substantial neck trauma
• Progressive arm or hand weakness
• Loss of coordination or new difficulty walking
• Loss of bowel or bladder control
• Numbness affecting multiple limbs
• New severe headache
• Dizziness, fainting, double vision, or difficulty speaking
• Fever with significant neck pain
• Known cancer with new spinal symptoms
• Symptoms suggesting spinal-cord involvement

A home traction device should never delay assessment of a potentially serious neurological, vascular, infectious, or traumatic condition.

Cleaning the device

Use a soft cloth lightly dampened with mild detergent or compatible disinfectant to wipe the body, head pad, wedges, controller, and accessible exterior surfaces.

Do not:

• Spray liquid directly into the mechanism
• Hose the device with running water
• Immerse the traction unit
• Lubricate the internal track without manufacturer instruction
• Use harsh solvent or abrasive cleaner
• Open or disassemble the housing

The forehead strap may be washed separately under running water with mild detergent. Allow it to dry completely before reattaching it.

Before use, inspect:

• Cable for twisting, fraying, or kinks
• Force scale for normal movement
• Knob for smooth operation
• Release button for normal return
• Neck wedges for cracks or looseness
• Wedge posts for damage
• Forehead strap and fasteners
• Rear stand and angle slots
• Head carriage for smooth travel

There are no user-serviceable internal parts. Stop using the device if the carriage sticks, the force reading appears inaccurate, the cable is damaged, or the release mechanism does not operate properly.

Return the head carriage to its starting position, loosen the forehead strap, and store the unit in its package or travel bag.

Choose a clean, dry location away from:

• Direct sunlight
• Excessive heat
• High humidity
• Dust and debris
• Heavy objects that could damage the carriage
• Children or anyone unfamiliar with the device

The available manual provides a one-year warranty against manufacturing defects in workmanship and materials. The manufacturer may repair or replace a product found to be defective under its warranty terms.

Misuse, rough handling, unauthorized repair, disassembly, modification, transit damage, or removal of the warranty-protection label may void coverage.

The WeTrac CT-800 Cervical Traction Device is available with free shipping across the United States and our Best Price Guarantee. Customers can also compare the Saunders Cervical Home Traction Device, browse our complete traction collection, or contact Balego customer service for product and ordering assistance. We offer free shipping and price-match support.