
Can You Exercise With IontoPatch? Activity, Sweat & Showering Guide
by Service, Training and SupportOctober 29, 2025
Can you exercise while wearing IontoPatch? The flexible, self-contained iontophoresis patch is designed to accommodate normal activity, vigorous movement, and weight-bearing exercise. Learn how to prepare the skin, keep the patch secure, handle perspiration and showering, and recognize when it should be removed.

TENS vs. NMES: What’s the Difference, and Which Do I Need?
TENS and NMES use skin electrodes for different treatment goals. Learn how purpose, muscle response, and device controls affect the choice, with examples from our catalog.

NAD+ Polarity & Iontophoresis: Charge and Evidence
For practitioners asking if NAD+ is positive or negative, determining the net NAD+ charge at physiological pH is essential for establishing proper NAD+ iontophoresis polarity. In clinical application, effective NAD iontophoresis often involves placing the solution under the NAD positive electrode to drive molecules transdermally via electromigration and electro-osmosis, a process highlighted in current NAD iontophoresis research. Beyond transdermal delivery, wellness enthusiasts frequently weigh NAD⁺ vs. NADH or analyze NMN vs. NR within a broader NAD precursor comparison to optimize cellular vitality. However, while wearable patches offer a non-invasive alternative to IV therapy, carefully reviewing the growing NAD+ patch evidence remains key to confirming true systemic bioavailability.

Twin Stim Plus DS5402 Manual: Setup & Troubleshooting
Whether you are consulting the Twin Stim Plus 3rd Edition manual or looking for quick DS5402 instructions to start treatment, learning how to use Twin Stim Plus allows you to leverage a versatile, four-channel electrotherapy setup for complete pain management and muscle recovery. This multi-mode device lets you effortlessly navigate targeted DS5402 TENS settings for nerve pain, DS5402 EMS settings for re-education, DS5402 interferential settings (IFC) for deep tissue relief, and high-frequency DS5402 Russian stimulation for muscle strengthening. If you have weak output or lead-wire errors, standard Twin Stim Plus troubleshooting—like checking pad adhesion or verifying battery life—will help you get back on track, and using the built-in Twin Stim Plus compliance meter will help you accurately monitor and log total treatment time for the best therapeutic results.

EMS 5.0 Manual: Setup, Controls & Troubleshooting
Mastering the analog setup of your EMS 5.0 muscle stimulator doesn't have to be overwhelming, whether you are consulting the official DE5030 manual or simply looking for straightforward EMS 5.0 instructions. Learning how to use EMS 5.0 starts with its core dials: setting the EMS 5.0 contraction time and EMS 5.0 relaxation setting creates the best work-to-rest ratio for targeted rehabilitation, while adjusting the EMS 5.0 ramp control ensures smooth, gradual muscle recruitment without sharp surges. By following these basic instructions for the analog NMES unit to optimize your EMS 5.0 settings, you can easily overcome common issues with quick EMS 5.0 troubleshooting—such as adjusting pad contact or rest intervals—to ensure safe, comfortable, and effective muscle re-education.

TENS 3000 Manual: Setup, Controls & Troubleshooting
The TENS 3000 (Model DT3002) is a simple, analog electrotherapy unit used for non-invasive pain relief that operates via straightforward top-dial controls and side toggle switches. To use the device, open the protective front panel, install a fresh 9V battery into the bottom compartment, connect the lead wires to two or four self-adhesive electrode pads placed firmly on clean skin around the pain area, and insert the lead plugs into the top CH1/CH2 jacks. Select your desired therapy mode (B for Burst, N for Normal, or M for Modulation) using the mode switch; adjust the inner Pulse Width (40–260 µs) and Pulse Rate (2–150 Hz) dials to your prescribed settings; and turn the top CH1/CH2 power dials clockwise to switch the unit on and gradually increase intensity to a comfortable tingling sensation. If you have troubleshooting issues like weak output, erratic current, or no power, check that the 9V battery is fresh and properly seated, make sure the lead wire pins are pushed firmly into the pads and top sockets, inspect the wires for internal breaks, and replace dried-out electrode pads to keep proper electrical conductivity.

Select Combo II Manual: Setup, Programs & Troubleshooting
The InTENSity Select Combo II is a versatile 4-in-1 electrotherapy device delivering targeted TENS, NMES, IF (interferential), and Russian stimulation through specialized body-part or custom manual settings. To operate the unit, charge its rechargeable battery using the USB cable (noting that stimulation is disabled while plugged in), apply electrode pads firmly to clean skin, connect lead wires to top channels 1 and 2, and use the M and S buttons to select your mode, target body part, and parameter settings before gradually raising intensity. For safety, the control panel automatically locks after 30 seconds of inactivity—press any Down (▼) button to unlock it. If the device turns off or triggers an electrode load warning, check for a depleted battery, loose pin connections, dried pad gel, or broken wires, as the unit cuts output if proper pad contact is lost.

Twin Stim IV Manual: Setup, Unlock & Troubleshooting
The InTENSity Twin Stim IV is a dual-channel portable electrotherapy device offering customizable and body-part-specific TENS (pain relief) and NMES (muscle stimulation) settings. To operate or troubleshoot the unit, charge its 3.7V lithium-ion battery via the included USB cord; if the device suddenly turns off, it typically indicates a depleted battery or the completion of its set treatment timer. For safety, the device automatically triggers an automatic lock after 30 seconds of inactivity to prevent accidental parameter shifts—simply press the Down (▼) arrow button to unlock it. During setup, ensure lead wires are securely plugged in and electrodes are firm against clean skin; if the unit displays an electrode warning or fails to deliver stimulation, check for dried gel, damaged lead wires, or loose pad connections. Finally, clinicians and users can track total usage time via the built-in compliance meter to ensure consistent, recommended therapy sessions.

Saunders Cervical Traction: Setup, Angles & Safety
The Saunders cervical traction device has three angle settings: 15°, 20°, and 25°. The angle adjuster’s top position is 15°, the middle is 20°, and the bottom is 25°. Use the angle and traction force specified by your healthcare provider; changing the angle is not a substitute for adjusting the prescribed force.

Saunders Lumbar Traction Manual: Setup & Safety
The Saunders Lumbar Home Traction Device is a portable pneumatic system for clinician-prescribed traction of the lumbar, or lower-back, region. The user lies on the device, secures the upper and lower harnesses, and uses a hand pump with a gauge to gradually apply and monitor the prescribed pulling force.
